Peoria Epoxy Pros
Concrete Floor Leveling in Peoria, AZ
Concrete floor leveling in Peoria, AZ for uneven and settling slabs before coating. Free estimates on self-leveling compound prep work.
- 15+ Years local experience
- 500+ Projects completed
- Licensed & Insured
Serving Peoria and nearby communities.
Peoria's growth over the past decade means a lot of garages sit on fairly young slabs, and some of them settle unevenly in the first few years before things fully stabilize. A dip near the garage door or a low spot that collects water isn't just cosmetic. It throws off coating thickness and can cause premature wear once epoxy or polyaspartic goes down over an uneven base.
Peoria Epoxy Pros levels these low spots with self-leveling compound before any coating starts, so the finished floor is flat and the coating cures evenly across the whole slab.
What's included
What's Included with Concrete Floor Leveling
Typically included: elevation survey, surface cleaning, crack pre-treatment, self-leveling compound pour, smoothing and finishing. Optional: fiber-reinforced or polymer-modified leveling mix for higher-traffic areas, moisture mitigation primer for slabs with known moisture issues. Customer prep: clear the garage or patio area of vehicles and stored items before the crew arrives.
Want a clearer scope?
Get a Free EstimateHow it works
How Our Concrete Floor Leveling Process Works
Step 1Floor Elevation Survey
A survey identifies low spots and height variations across the slab.
Step 2Surface Cleaning
Dust and debris are removed to allow leveling compound to bond properly.
Step 3Crack Pre-Treatment
Existing cracks are addressed before leveling material is poured.
Step 4Self-Leveling Pour
A self-leveling compound is poured and spread across uneven areas.
Step 5Smoothing & Finishing
The leveling compound is smoothed to achieve a flat, uniform surface.
Step 6Cure Time & Inspection
The leveled floor is left to cure and then inspected for flatness.
Materials
Materials and Methods for Concrete Floor Leveling
Leveling work uses a different material set than coating work since the goal here is a flat substrate, not a finished surface.
Self-Leveling Underlayment
A flowable compound fills low spots and creates a flat substrate, important on newer Peoria slabs that settled unevenly after the pour.
Fast-Setting Leveler
A quick-setting formula reduces downtime between leveling and coating, so the project stays on schedule.
Bonding Primer
A primer improves adhesion between old concrete and new leveling material, especially on slabs with any existing sealer residue.
Fiber-Reinforced Compound
Fiber additives increase strength and reduce cracking in the leveling layer under vehicle weight.
Polymer-Modified Mix
A polymer blend improves flexibility and durability of the leveled surface where minor slab movement is still expected.
Moisture Mitigation Primer
A primer reduces moisture transmission from the slab into new layers, relevant on ground-level garage slabs.
Questions on materials?
Get a Free EstimateTimeline
How Long Does a Concrete Floor Leveling Take?
- 01
Stage 1
Leveling adds a day or two to a coating project timeline, depending on how much of the slab needs correction.
- 02
Elevation survey
same day.
- 03
Surface cleaning and crack pre-treatment
half day.
- 04
Self-leveling pour and finishing
1 day.
Need a schedule that fits?
Get a Free EstimateWhen to call
When to Call for Concrete Floor Leveling
Call (928) 384-0598 or request a free estimate if any of these sound like your garage or patio.
- Water pools in one corner of the garage after rain or hose rinsing.
- The slab has a visible dip or slope near the garage door threshold.
- You're planning an epoxy or polyaspartic coating and the current floor isn't flat.
- A new-construction slab has settled unevenly in the first couple years after the build.
Seeing warning signs?
Get a Free EstimateBefore & after
Before and After Concrete Floor Leveling
Before 
After
FAQs
Concrete Floor Leveling FAQs
How do I know if my garage floor needs leveling?
Standing water after rain, a visible dip near the door, or an uneven feel underfoot are the main signs. A site visit confirms it with an elevation check.
How much does concrete floor leveling cost in Peoria?
Cost depends on the square footage of low-spot area and how much material is needed. A free estimate after an elevation survey gives you an exact number.
Will leveling delay my coating project?
It adds about a day to the schedule since the leveling compound needs to cure before coating begins, but it prevents coating thickness problems down the line.
Can a new-construction slab need leveling if it's never been coated?
Slabs that are still settling in the first few years after a pour sometimes develop minor low spots that are worth correcting before the first coating goes down.
Is DIY self-leveling compound a good option?
For small, very minor dips it can work, but uneven DIY pours often create new high and low spots that cause coating thickness problems later. Larger areas are worth having leveled professionally.
Next step
Get a Concrete Floor Leveling Estimate in Peoria
Call (928) 384-0598 or request a free estimate. We'll survey the slab, identify low spots, and give you a written scope before any leveling work starts.
More services
Other Epoxy Flooring services
Garage Floor Epoxy Coatings
Garage floor epoxy coatings in Peoria with grinding, crack repair, and hot-tire resistant topcoats. Free estimates.
Epoxy Floor Coatings
Standard epoxy floor coatings for Peoria garages, basements, and interior concrete. Durable finishes, free estimates.
Polyaspartic Floor Coatings
Polyaspartic garage floor coatings in Peoria, fast-cure and UV-stable for Arizona heat. Free estimates available.
Ask about Concrete Floor Leveling
Tell us about the project and how to reach you.